Online Registration Reservation System

Chapter I INTRODUCTION Project Context The presence of Online Registration and Reservation system of Dalton Academy help the students as well as the school to fasten their system of enrollment as well as reservation. At present, the Dalton Academy has three sections of each year level. The enrollment and reservation process is done in a first come per serve basis, thus if you are early to enroll even you are belong in the first section however if you are late enrollee then you are place in the last section. This policy is there to all year level from first year to fourth year.There are certain problems also have been encountered such as the process of registration in which all year level are piled up in the registration booth. Conflict of date for the registration and reservation. The filing-up of information in the registration forms. In order to resolve this, we create an online registration. This will be indicate a registration procedure in the online registration and reservation system. It reserve in the section, create an account to register in the form in order to reserve in the section.Purpose and Description of the project Purpose This study covers the registration and reservation process of enrollment the respondents is easy to resolved enrollment process problem. It is not difficult for them even if how many students reserve from the online registration reservation but it also limited because three section every year level and per section consist of fifty students only and also much better easy to look if how many students are reserve for enrollment every day.This study will help the teacher’s with this enrolling period because they easy to see on the internet, even are they in other places. Anytime, anywhere they can easily to take a look at that online registration reservation system. Description The study covers the features in this room to show the Registered user under this covered the home, about us information, the administration, the ph oto gallery to show some features of the school, the registered students account. This register page here it show the sign up if you are willing to reserve for registration.The sign up contains the Fname, Mname, Lname, Address, Birthdate, Birthplace, Age, Gender, the username and the password, you can also browse picture if you have. And after that click the register personal information to complete the registration, after you register to sign up the registration form which has a step to be followed of your personal background, under the guest user you can update your profile, your personal information in enrollment and they recognized if what year level and school year you are in the enrollment registration, you can also post a comment on blog and of course the log out.The present of administrator side show the login user account and after that show the Dalton Academy list which is the Manage announcement, Gallery, Registered students, Join blog, School year, manage about us inform ation and the administration setup. Through this is easily to take a look with our system covers. Objectives of the Project This study aims to design, develop and implement an Online Reservation Registration System to be able to: 1. Registered User to: a. log in to connect and communicate with the system. . View the information about the Dalton Academy. c. Registration/ Reservation process. d. Open for slot for the students, first come first serve (Fifty students per section). e. Close no slot, limited only. 2. Guest User to: a. View information about Dalton Academy. 3. Administrator to: a. Update (Add, Edit and Delete) different information about Dalton Academy. b. Filter Registration of reserve students for this coming school year. c. Restrict guest users in accessing the different services of the system

Should a foreign state provide a mortgage

Should a foreign state provide a mortgage for a diplomatic mission of another foreign state? BY FeltxR02 Diplomatic Law Should a foreign state provide a mortgage for a diplomatic mission of another foreign state? Until the beginning of the 20th Century was generally recognized the principle of international law according to which foreign states cannot be sued in courts of a foreign country (the principle of absolute immunity). This has proven to be unsustainable due to increasing economic activities of public authorities. It has been abandoned by most Jurisdictions.In Germany for example the principle of limited immunity is now practiced since the beginning of the 1960s. Therefore foreign States only enjoy immunity when they act in the name of their sovereignty (acta lure imperil). For claims arising from economic activity (acta lure gestionis) the foreign state cannot rely on its freedom of Jurisdiction. This can certainly be seen in a mortgage, because in international law not the purpose of government action, but he nature of the action determines whether it is a actum Jure imperil or lure gestionis.So there is generally a private law relationship between the bank and the ambassador, as a representative of the country. With the threat of payment default, the bank could therefore theoretically initiate enforcement and claim the money in court. Problems arise, however, in the enforcement of the claim, since Article 22 paragraph 3 of the Vienna Convention of 1961 rules that the buildings of an Embassy re excepted from any enforcement.For actions of enforcement or execution against a foreign State it is not allowed to take any measures against the things the diplomatic missions needs for its diplomatic representation and to the performance of their official functions (ne impediatur Legatio). In resume it can be dangerous for the bank to give the mortgage to the countries representatives, though you have the possibility of trying to enforce your claim.

Cap Nnaf Essay Example for Free

Cap Nnaf Essay Choose cite format: APA MLA Harvard Chicago ASA IEEE AMA Mr. Raghunath was happy that Rahul showed keen interest in his business but was worried about Ram who would always spend time with computers. He felt that if the interest of the two sons be put together they could start a flourishing business of their own. The boom in the IT industry made him find ways to satisfy his son’s dream. After college, the twins were drifting apart due to varied interest. Mr. Raghunath decided that this is the time for him to intervene and make decisions for his sons. He decided to start a computer business for his sons. He asked Rahul, a commerce graduate to draw up a proposal for the same. Rahul came out with the following ideas: The area they lived on ad run shop consisted of middle income group families and many of them did not possess computers at home Their shop could provide the following services: * Computer classes for various age groups. * Computer using facilities on payment per hourly basis and printing of documents from computers. * Internet access facility at the prevailing market rates by entering into contract with AIRTEL. * Computer games corer for children Rajiv jumped at the idea and they made up a common proposal. Rajiv wanted that they purchase 10 computers and start with first two areas of operation and expand when things go well. The shop they had at the market place was a single storey building. Their father offered to build the first floor and give it to them for their business. He spent `5,00,000 on construction of the facility and gave them `5,00,000 for the business. The sons went to bank and put up their proposal and managed to get a loan to the extent of 75% of the cost of computers ` 4,00,000 with printers. As the bank manager was aware of the credit worthiness of Mr. Raghunath, he advanced loan of `3,00,000. Total amount to be repaid will be `3,60,000 including interest in three annual installments as follows: * End of the first year = ` 1,30,000 * End of the 2nd year = ` 1,20,000 * End of the 3rd year = ` 1,10,000 (Where ` 1, 00,000 is the principal repayment) They started business on 1st April 2010. Rahul decided to deposit ` 4, 40,000 in the bank. He gave ` 1, 00,000 to computer company as 25% of the value of computers purchased and ` 3, 00,000 out of bank loan availed. He deposited ` 20,000 for electrical connection with the Electricity Board. He paid deposit of ` 1, 00,000 with AIRTEL for Internet connection. He used the telephone connection of the shop as there were two connections at the shop. The brothers got the computer cafe furnished by paying ` 50,000. Rahul got pamphlets printed and distributed at the cost of ` 4,500 in the surrounding colonies. All payments were to be made by cheques. All the receipts were in cash to be deposited in the bank on the same day. The students on the average paid a monthly fee of ` 500 for the three months computer evening classes. There were a number of internet subscribers and receipts on account of internet facility was ` 10,000 a month in the first quarter on an average. They decided to buy and sell computer stationery also like floppy, discs, CDs etc. At the end of the financial year, their results showed the following: | `| Total revenue including sale of computer stationery| 4,98,000| Purchase of computer stationery| 55,000| Electricity charges yet to be paid| 1,24,000| Telephone charges| 34,000| Petty expenses| 12,000| Entertainment expenses| 10,000| Maintenance expenses| 10,000| There was a helper at their father’s shop, who agreed to clean up the computer cafe and fetched water to various visitors. For the additional services, he was paid ` 500 per month. They withdrew `. 3, 000 by cheque each month for their personal expenses. They paid bank loan regularly. The father was pleased at their son’s efficiency. He wanted to expand business. Mean while Rahul received the pass book statement (for the end of March 2011) which showed the transactions as follows: Particulars| Deposit| Withdrawal | Balance `| Balance as on 1 march 2011| | | 4,76,500 CR| Fees remitted direct into business account. | 50,000| | 5,26,500 CR| Bank charges| | 500| 5,26,000 CR| Withdrawal by cheque no†¦Ã¢â‚¬ ¦| | 6,000| 5,20,000 CR| Payment by cheque no†¦Ã¢â‚¬ ¦. | | 6,000| 5,14,000 CR| Interest credited| 2,000| | 5,16,000 CR| Balance as on 31 march 2011| | | 5,16,000 (CR)| 1. Analyze the transactions and explain the rules applied as per double entry system of bookkeeping. 2. Journalize the above transactions. Post them into the ledgers and prepare trial balance. 3. Prepare Bank Reconciliation Statement and make necessary adjustment in the books of account. 4. Prepare Profit and Loss account and Balance Sheet. 5. Charge depreciation @25% on computers, @10% on furniture, 5% on buildings. 6. Paisa can be rounded off. 7. What are the basic assumptions and concepts applied by Rahul while preparing the above statements? 8. Calculate profitability ratios. 9. They approached bank for further loan. Compute the ratios the banker will require before granting the loan. 10. Comment on the efficiency of the business if the net profit and gross profit in similar type of business concerns are 20% and 50% respectively. —————————————— Cap Nnaf. (2018, Oct 17).

The role of stand up meetings in agile software development ( benefit) Essay

The role of stand up meetings in agile software development ( benefit) - Essay Example This study investigated one of the most important elements of the Agile approach, daily stand-up meetings. Over 40 percent of all the respondents were developers, the other bigger proportions were made up of project managers, analysts, software testers and solution architects. This can probably be attributed to the fact that in any process of software development, developers play the greatest role as they are directly involved in the technical processes. According to Martin (2003), an Agile development team needs sufficient software development personnel with deep experience and good working relationship to succeed. Project managers also formed a substantial proportion of all respondents; this too can be explained by the fact that every Agile team has got to be led by a project manager. Sometimes we have a larger project split into smaller project tasks each with a project manager (Larman, 2004). Other roles represented by respondents included Team Leads, Scrum Masters, CEOs, Testers , Delivery Managers, Agile coaches and Product owners. Many responses were not obtained from these groups, probably because they did not play huge roles in their team or they happened to be in leadership positions e.g. CEOs and Team Leads.The software development process function better at optimal conditions; this can only be made possible with the right number of members in a team, each playing a key role. Depending on the company and software development requirements of a project, Agile team sizes differ from project to another, Scrum and DSMD recommend that an ideal project team should have about 10 or twelve people. XP does not have a particular preferred number but recommends that teams be as small as possible. Over 83.8 percent of the respondents indicated that they worked in a team of between one and ten members - these are relatively small groups. Many software developers prefer to carry out projects in small flexible and manageable groups as recommended by the Agile methodo logy. Agile software development is particularly very iterative and participative and requires excellent communication, consultations and interaction between the members. For such teams to work effectively they require a moderate to minimum number of members for flexibility and greater team bonding, for example, stand-up meetings can be more effective and practical with fewer members in the team rather than a large number of members (Larman, 2004). A number of different Agile methods are used in software development. These include Scrum, DSDM, Extreme Programming, and Lean-Kanban. The choice of method is largely determined by software development needs as well as preference. According to Larman (2004), project needs sometimes dictate the choice of method between the various Agile methods. - Developer preferences also play a large part in determination of the methods to be adopted, in most cases once a method is adopted it is used by a company consistently for all other projects. Thi s study found that scrum is the most preferred Agile method with over 59 percent of the respondents using it. The popularity of scrum can be attributed to its ease of use and flexibility. According to Rising and Janoff (2000), Scrum remains the most

Corn as biofuel Research Paper Example | Topics and Well Written Essays - 1250 words

Corn as biofuel - Research Paper Example Courting this scenario an alternative source of energy is in its utmost need. At this background a series of alternative sources of energy such as solar energy, hydro electric energy, and atomic energy all made their entrance on the discussion table. However the most new form of alternative might be the bio fuel that nowadays has gathered much interest of the scientists. Among the bio fuels, Jatropha, Pongamia are some very common names, but the recent emergence of corn as a vital source of bio fuel and there by a source of energy might be nothing short of path breaking. However before moving into details regarding the corn fuel it would be wise to consider some associated points before hand. Crude Oil & USA United States of America is the largest consumer of crude oil and the third largest producer. In statistical terms USA produces around 10% of the global crude oil and consumes 24% of the same. Furthermore in order to keep its existence in export market the country indulges in exp orting 1.4 million barrels of crude oil per day. A careful consideration of this situation clearly indicates a demand supple gap that needs to be filled with import of crude oil. It has been estimated that USA in the year 2007 imported 12MMBD that is in terms of percentage 58% of the total domestic demand (Energy Information Center 2008). Dependency of USA in terms of crude oil on other countries and overseas Among the total import of crude oil the Western Hemisphere constitutes 51% of the total import. Canada, Venezuela, Saudi Arabia, Mexico and Nigeria are other oil exporting countries in USA in exact order. The following table depicts the dependence of USA in terms of crude oil import based on 2007 data. Name of the Country Percentage of Crude oil exported to USA Western Hemisphere (North, South, Central America along with parts of USA in Caribbean) 51% Canada 23.3% Venezuela 10.7% Saudi Arabia 10.4% Mexico 9.2% Nigeria 8.3% Source: Energy Information Association, 2008 Rickman, 2 009 Alarming news is that this dependency without being reduced over the time is actually increasing and statistics reveals that import of crude oil has actually increased by 0.183 MMBD in August 2008 over the previous month. It should also be kept in mind that countries like Iraq, Brazil, Angola and Kuwait are kept aside of the above table who contributes at substantial level to the USA oil import. (Energy Information Center, n.d.; Energy Information Center 2008) Why should we look at alternative fuels? As mentioned earlier that fossil fuel is limited in availability and it is constantly depleting, at this rate either coal or crude oil can not sustain as the prime form of global energy source beyond 2025 to 2035. Humanity is in search for some alternatives that can be used and re used time and again as a source of energy or at least can be produced at one’s free will. The trade partners of USA in Crude oil and their unfriendly behaviour USA shares a hostile relation apart fr om Saudi Arabia and partially with Kuwait among al the Middle East countries. Among them Iraq and Iran are USA’s arch enemies. Saudi’s oil reserve is depleting and it can not hold for long its position as an important oil exporting country. Kuwaiti oil wells were set in fire long back during the Iraq-Kuwait war and that had eroded the country of the prime position it used to enjoy as oil enriched country. Again historically Middle East is an area that has

Improving Interactive Play for students with Autism Essay

Improving Interactive Play for students with Autism - Essay Example The conversation could have been a casual one as the only thing important in these students would have been relating to their initiating powers. This would help to increase the overall initiating power of these students and thus help them to interact with each other easily without any conflict. Lastly the students could have been rewarded in accordance to their particular needs with the things that they desire the most (Mastropieri & Scruggs 2010) After the intervention program the students can be allowed to settle with each other so that they can get to interact amongst each other without anyone prompting or reinforcing them. The students would be put in a friendly environment so that they can easily interact with each other and play accordingly. It is very important for an adult to supervise these students in according to their particular needs. It is very important for the students to be given a chance to interact with each other freely without any particular set of rewards or perks (Mastropieri & Scruggs

Planning Health Promotion & Disease Prevention Programs Assignment

Planning Health Promotion & Disease Prevention Programs - Assignment Example Plan a meal timetable within your means. Be realistic to yourself, you may not be able to become a complete vegetarian, but you can incorporate vegetables into your meals twice or thrice a week. Do not plan to lose 30 pounds in one month that is out of your reach (Ostchega & National Center for Health Statistics, 2008). Instead, you can plan to lose 2 pounds every week. That is achievable and will be relevant to the DASH program. This is a primary prevention program that an individual can work alone’ (National High Blood Pressure Education Program, 1993) Regular exercise at least 30 to 60 minutes per day in a week lowers your blood pressure by 4 to 9 millimetres of mercury (mm Hg). For it to be effective in controlling hypertension, SMART goals must be set. Exercise will be effective when you ask yourself what you want to accomplish. For instance, you can decide to lose weight by walking. A specific exercise goal will help you decide which formula to use to accomplish your objective. To know that you have reached your target, there must be measurement. Do not just walk often, walk for 30 minutes for seven times in a weak. Use a scale to measure your weight and a tape measure to measure your waist before the beginning of weight loss program. This will help you calculate the progress of the program. The program should answer the questions like how much and how often. The program objectives should be achievable. For example, you cannot start by walking 7miles in 20 minutes but you can start with 1 mile in 30 minutes. The basic question here is, â€Å"can I do or have the ability. When you start, the program, ask yourself, do I have enough resources and skills to do this? Do I have the will to work for this objective? It should be realistic and not what you cannot sustain. For instance, you can walk for 30 minutes every day but it is difficult to walk for 2 hours

Compare of Artwork the Mayan and Apulian Bowls Research Paper - 1

Compare of Artwork the Mayan and Apulian Bowls - Research Paper Example The Apulian Lekanis: Head of a Woman and Winged Genie, and Bowl and Lid with Boar Head is credited as a gift to Mrs. Henry E. Perry in the late 4th century B.C. This work was created as part of Greek culture. It falls under the visual labor sculpture using terracotta as the medium and is currently visible in Indianapolis museum under the Classical collection. Conversely, the bowl and lid with boar head is the work credited to the Maya culture and falls under the Native American collection. The creation date was around 350-500 A.C and the art is credited as a gift of Bonnie and David Ross. The materials used include slithered and painted earthenware. Amongst the Apulian or South Italian vases, some of the common themes were transcendent sections of love and merriment (Indianapolis Museum of Art n.p). The urns were then offered to the dead with the offering venue being the tombs. The Lekanis portrayed red-figures of ladies of style. These Lekanis were routinely on the lids secluded fro m each other by huge palmettes on both sides (Ambrose 14). Additionally, each lady had a half palmette in front of her and behind her a volute. Some of the attributes of the Lekanis were that they were identical in terms of Stephane, Saccos, and neatly comprehensive ribbons. The lid of the Apulian vases also had winged genies. The Greeks believed that the genies would help with the valedictory rites and with the switch to the afterworld. Unlike the Apulian Lekanis, the Bowl with a Boar Head was mostly used to recognize Maya civilization (Indianapolis Museum of Art n.p). The boar was linked with the heavens and the sun’s movement. Additionally, the Bowl with a Boar Head was an earthenware container and not a sculptured container like the Apulian Lekanis. The boar head was used as a handle for opening the boar and not just a decorative picture.  Ã‚  

Health and Illness Assignment Example | Topics and Well Written Essays - 250 words

Health and Illness - Assignment Example I think World Health Organization did not include the definition of illness as such because illness is actually an aspect of health, since it is not merely and absence of disease. For me though, health is a general condition of the mind, body and spirit – it could be well or unwell. A person with a healthy outlook in life is usually physically healthy as well. Sickness can be a disease or an illness. Disease, for me, is physical damage to one’s body – a deficiency, maybe, or a wound or trauma. Illness, on the other hand, refers to the sociocultural context of having a disease, and this includes the experience and perception of a disease. It may also include religious and spiritual infirmities and disbeliefs. What I mean about the sociocultural context is that the patient and his community define, classify the episode of sickness in a way that it is meaningful to them and the society in general. It does not have to be a technical â€Å"malfunction of the body†, and can accommodate meaning defined by how a person is feeling and thinking. Preamble to the Constitution of the World Health Organization as adopted by the International Health Conference, New York, 19-22 June, 1946; signed on 22 July 1946 by the representatives of 61 States (Official Records of the World Health Organization, no. 2, p. 100) and entered into force on 7 April

Consider all of the elements of control used by the Party in the Coursework

Consider all of the elements of control used by the Party in the selections from Nineteen Eighty Four - Coursework Example Police were feared to the extent that it was thought everywhere any time one was being seen by a police officer. This made the masses as seen in the behavior of prisoners timid and as such they couldn’t even air out their minds. There were arbitrary arrests and convictions without trial with the subjects being forced to confess to false of crimes such as sabotage, espionage and embezzlement. The party employed a lot of propaganda in management of its affairs; there was an underground movement of conspirators (the brotherhood) which was spreading fear and labeling party rebels. it excites to not how power can be used by a party to propagate vested interests, instill fear in masses and hence ensure they submit completely. Separation was ripe with party members being restricted from going just to any shop. This was to force even those with divergent views succumb bow to pressure and dance to the whims of the party. People were totally deprived of their fundamental freedoms such a s free association, freedom of speech and others. In conclusion therefore Nineteen Eighty Four is a perfect narration of how regimes can engage in evil doing, deprive masses of their rights and employ unethical means to seize control. People are forcefully forced to sing party slogans, made to keep silent and not question anything happening around for fear of being punished. The writer is a victim and is in prison for obvious political reasons; they are tortured in prison and forced to confess to charges that are not

Thorpe Parks history Essay Example for Free

Thorpe Parks history Essay In 1970, the site was an active gravel pit owned by Ready Mix Concrete and in 1971 work was granted for the construction of a 500 acre Water Park. Thunder River and its surrounding area were developed in 1987, and 1988 saw the opening of the 630 seat Palladium Theatre. In 1989 Canada Creek, incorporating Loggers Leap, was developed. Since 1991 many attractions have been added. In 1996, X:/No Way Out, the worlds first pitch dark, backward roller coaster was introduced and for two years running, in 1996 and 1997, Thorpe Park was voted the most Parent-Friendly leisure in the UK. Pearsons, who owned The Tussauds Group, bought Thorpe Park in 1998. On 19th October 1998 it was announced that Pearson had sold the Tussauds Group to Charterhouse Development Capital for i 352m. Europes first 4D Cinema experience, Pirates 4D was opened in 1999 and in 2000, Europes highest water ride, Tidal Wave was added to the excitement of Thorpe Park. The Tussauds Group Vision and Mission Vision: Entertaining People. Mission: To deliver real growth in profits to take Europes leading entertainment world-wide. The Marketing Department are a small team who work across both Thorpe Park and Chessington World of Adventures. It is the overall responsibility of the Marketing dept to ensure that the brand identities of the two Parks are maintained in all communication both on and off the Parks. They do this through first identifying the brand identity, target market, and visual representation of the brand, ie the logo. For Thorpe Park the target market is families with children over 12. Each year the marketing department will put a marketing plan together which covers the following areas: Product. Although almost with out exception a new attraction is launched each year, and the main launch communication will focus on that, general communication about the rest of the Park is required. Theme Parks provide a whole day out for the family and its not just bout the rides. The other attractions, places to eat, games, photography, the atmosphere all play an important part in delivering a great day out. Pricing. There is a complex pricing structure for the Park which looks to maximise the revenue the Park can achieve with its targeted number of visitors. Marketing will review the pricing each year and along with the finance department look at how the budgeted targets can be achieved through the pricing matrix. Advanced sales are important to the business so tickets booked in advance are discounted, also those booked via the Internet are further discounted as this is a more efficient way for us to produce the tickets. Advanced tickets reduce the queues at admissions as visitors already have their tickets and can go straight in to the Park. Promotion. Promotion of the Park happens via a number of different communication channels. Advertising. This is generally broken down into two areas; the creative production of the advert and then the choice of where to place that advert, TV, Radio, Press etc. For the year 2002 communication for Thorpe Park is the launch of the Worlds First 10 Looping Coaster, Colossus, targeting a young teen market. New adverts will be created for both TV and radio use. Promotions. Promotions are very import in incentivising visitors to come to the Park. The incentive is generally either a Buy One get One Free mechanic or a discount of the full adult or child price. Thorpe Park runs promotions on its own or in conjunction with the Tussauds Group, ie Tesco. Promotions are often run with a wide variety of retail and media partners, newspaper, or solus via a direct mail campaign to surrounding homes. Public Relations. This area is all about getting positive exposure in the media, TV, Radio and Press. This is generally achieved through issuing Press Releases and conducting interviews with journalists. Measuring the Success. Throughout the year, how the Park is doing against its financial targets is constantly reviewed, but in addition Marketing conducts ongoing research in to how the Park is performing on a daily basis. Questionnaires are handed out to visitors as they leave asking them to rank the rides experiences, eating places, how friendly and helpful the staff were, etc. This provides information on where things may be going wrong and how to put them right. New Media is a crucial area for involvement now and in the future. In addition to maintaining its own site: www. thorpepark. com, the Marketing department looks to exploit other opportunities for advertising, promotions and PR on other sites. Use of agencies. Thorpe Park uses a wide variety of agencies as they bring different areas of expertise and experience to the Park. We use and advertising agency to create the TV, Radio ads etc and also for all the design work for the Gate Map. The space for the TV, Radio slots etc is purchased by a media buying agency. We also use a Sales Promotion agency, PR agency and Internet design agencies. Some of these are different agencies to those used for Chessington World of Adventures. Corporate Hospitality makes it possible for businesses to entertain their guests at Thorpe Park. Thousands of corporate guests can be catered for at any one time, or even hire the whole Park for an evening. Education. An establishment like Thorpe Park offers the opportunity for students studying the leisure industry, business or animals to visit the Park and find out more about their subject. For this reason, it is possible for groups to incorporate an educational talk into their visit.

Religious Commitment Essay Example for Free

Religious Commitment Essay Religious governments often have a very undemocratic approach of management, with strict and stringent laws and little freedom. Women are thus usually hard-pressed, dictated, given fewer liberties, and less educated. It is no surprise therefore that these societies are generally male-dominated with little influence from women. Education is primarily based upon the laws and scriptures of state religion with little room for anything else. From primary to secondary studies, emphasis is placed upon teaching and preaching everything about the religion and its practices. Anything which differs from religion is discarded. This consequently results in low literacy rate in terms of modern ways, studies, technologies and knowledge. Civil laws are also based upon the scriptures of the religion, with severe and strict rules and regulations. There is little democracy, freedom, and usually harsh punishments given out for violating laws. Religious laws are of chief importance and consequentially high government posts are inhabited by religious clerics and leaders. There are a large percentage of these types of governments in Middle East, Asia and East, where as the West and European countries are exceedingly democratic. In recent times, extremists Muslims have been severely criticized for trying to impose their religion and violating basic rights of freedom. It is also one of the reasons cited by the American government for attacking Afghanistan and Iraq, which were primarily religious governments with little freedom and democracy. On the whole, religious governments place emphasis on religion, its laws and practices. Compliance is usually mandatory, with all matters: women, education and civil laws etc. molded according to religious beliefs. Reference Audi, Robert. Religious Commitment and Secular Reason. Cambridge: Cambridge University Press.

Case Study of DFA and NFA Implementation

Case Study of DFA and NFA Implementation Muhammad Danial Waseem Hania Farooq Table of Contents (Jump to) Digital Social Media Popular Social Media Tools and Platforms Blogs Face book WhatsApp Viber Twitter YouTube Flickr Instagram LinkedIn Groups Vimeo STATE 1 (login state) Regular expression for the state 1 (After login ) Regular expression for the state 2 Combined automata Table (3) Transition table for combined states of facebook Scenario 2 Language Automata Transition table: Scenario 3 Language References References of Images List of Figures Figure 1- Types of social media Figure 2- Automata of first state of facebook Figure 3- Automata of second state of facebook Figure 4- combined state of facebook Figure 5- Screenshots of Whats App Figure 6- Automata of Whats App Figure 7- Screenshots of Viber Figure 8- Automata of viber Introduction Digital Social Media Digital Social media refers to the means of interactions among people in which they create, share, and/or exchange information and ideas in virtual communities and networks. The Office of Digital Communication manages the main Facebook, Twitter, Instagram, Foursquare, YouTube and Vimeo accounts. Furthermore, social media depend on mobile and web-based technologies to create highly interactive platforms through which individuals and communities share, co-create, discuss, and modify user-generated content. They introduce substantial and pervasive changes to communication between organizations, communities, and individuals.These changes are the focus of the emerging field of  technoself  studies. Social media are different from traditional or industrial media in many ways, including quality, reach, frequency, usability, immediacy, and permanence Diagram depicting the many different types of social media There are many effects that stem from internet usage. According to Nielsen, internet users continue to spend more time with social media sites than any other type of site. At the same time, the total time spent on social media in the U.S. across PC and mobile devices increased by 99 percent to 121 billion minutes in July 2012 compared to 66 billion minutes in July 2011 Popular Social Media Tools and Platforms Blogs A platform for casual dialogue and discussions on a specific topic or opinion. Face bookThe world’s largest social network, with more than 1.32 billion monthly active users (as of June 2014). For accessing users create a personal profile, add other users as friends, and exchange messages, including status updates. Brands create pages and Facebook users can â€Å"like† brands’ pages. WhatsApp WhatsApp is the best social network and mobile application. User create accounts send images videos audio notes update status, recently Facebook purchased it. Viber Viber is also an application and bestest application that gives both option of chat and call to the user. TwitterA social networking/micro-blogging platform that allows groups and individuals to stay connected through the exchange of short status messages (140 character limit). YouTube Video hosting and watching websites. Flickr An image and video hosting website and online community. Photos can be shared on Facebook and Twitter and other social networking sites. Instagram A free photo and video sharing application that allows users to apply digital filters, frames and special effects to their photos and then share them on a variety of social networking sites. LinkedIn GroupsA place where groups of professionals with similar areas of interest can share information and participate in conversations. VimeoVideo hosting and watching websites. Scenario 1 An example of digital social media, i.e. Face book. Facebook(formerly[thefacebook]) is an online  social networking service  headquartered in  Menlo Park, California. Facebook now allows anyone who claims to be at least 13 years old to become a registered user of the website. After registering to use the site, users can create a  User profile, add other users as  friends, exchange messages, post status updates and photos, share videos and receive notifications when others update their profiles. Additionally, users may join common-interest user groups, organized by workplace, school or college, or other characteristics, and categorize their friends into lists such as People from Work or Close Friends. Construct a finite automata for facebook in which a user first access to the login page of facebook then user enter ID and password for login process. This process work in backend due to searching algorithm and after search facebook opens the account of the user who enters the ID and password. And now user is entered in home page. If the user wants to create account on facebook then he/she have to enter some details that are required for creating an account and after verification of detail the user can use their home page. In home page there are 4 main options and many other option if the user wants to stay on the home page i.e. user may use search bar for searching any stuff, any application any friend or anything. User want to access a group that he already joined and either option. The 5 main options are: Newsfeed (notification) Sharing Profile Search Chat Now if user want to open newsfeed then user is able to see latest notification or anything in which user is tagged or anyone post on his time line or having response of the something which the user is already shared. User wants to share any picture/audio/video or any status among his friends. The other option is profile. Profile is the timeline of the user in which user can see or comment on what user have already shared or any friend have shared or commented on is shared thing or on status and user can update his/her personal information. The other option is search. The user want to search some content by using search bar. The last but not least option is chat. That enable the user to chat with the friends on his/her friend list. As the whole automaton of the facebook is too vast that’s why for describing them clearly we divided it into 2 states. The first state is login state and the other stage is after login stage. And at the end we will combine all the stages as final automata. STATE 1 (login state) L= {L, EN, P, H, CA, ED, V,} Q= q0, q1, q2, q3, q4, q5, q6, q7 Where, L=login EN= enter name P= enter password H=home page CA=create an account ED=enter detail V=detail verified The above automaton is illustrating that when the user give the input â€Å"L† means login and after â€Å"L† machine accepts the name and the password i.e. EN (enter name ) and p (password) for reaching the final stage of login state i.e. HOME. The user have another option if the user have not any account then the facebook machine (automata) also gives the opportunity to create an account for creating the account the machine accepts the particular details i.e. ED means to enter the required detail. In this automata it is defined that when user open the facebook user have 2 option either he/she open account or he/she creates new account. So if user have not his account so he follow the second option go to create option enter all the details then verified these detail and account created and if have user have already account so he he/she just enter name and password and enter these thing . So same as defined in this automata user have to follow two paths which are clearly mentioned in this automata. Regular expression for the state 1 STATE 2 (After login ) L= { H, SH, NF, Pr, S, CH, LO, D} Where SH = user wants to share the pictures/audio/video or text among his friends. NF = notification from the friends or the pages liked. The user can select the notification and see Pr= timeline of the user. In which user can see what he shared or he/she can update his/her information. S= the user want to search some contact. CH = it stands for chat. That it enables user to chat with the friend on his/her friends list LO = logout. The user sign out and get return to the main page Second state is describes is the state open after login so after login facebook is a multifunction social media but we compiled main functions. So when user logins to fb user have many options now depend on user what user wants to do. either user stays on home page and read normally or he shared any others post, or check the notification of other or the thing which he/she tagged in, or view his own profile or any others profile or use the search option to find any person or search any app or games for playing or using.†¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦ There are many others also things to do but these are the main thing which normally user can do on the daily basis. Now there are some other things also which we mention in automata is using keelene. It’s like if user logins the page and he do not do anything just stay remain in home page it’s not necessary that all user do the same so it’s also mention in automata. Regular expression for the state 2 It’s a general regular expression which is made by the automata but we have to normalize the regular expression fro make it simple and complicated for other so they don’t try to copy, After normalization I denoted as the r.e2 because it’s the same regular expression but just a normalized form. See transition table on the next page, Combined automata L= {L, EN, P, H, CA, ED, V, H, SH, NF, Pr, S, CH, LO, D } r.e = S (L.E.N.P.H + CA. ED. V. H) H*(SH+ + NF++ Pr+ +S++CH*)D(H+LO) Scenario 2 Another example of digital social media i.e., WhatsApp WhatsAppis a  proprietary,  cross-platform  instant messaging  subscription service  for  smartphones  and selected  feature phones  that uses the  Internet  for communic

The Downside to Land Use and Urban Development Essay example -- Enviro

The Downside to Land Use and Urban Development    Excessive land use and urban development are a problem, because it causes pollution and it robs animals of their homes.   When man extends his boundaries into nature, nature has no choice but to go somewhere else.   Expansion and population are the cause of this environmental problem.   I propose to set a standard for land development for every city.   In that I also propose that each city should impose a set number of persons to live in that city.   Each city must impose stricter guidelines for waste management.   Finally I propose that the city set limits for development, and expansion. Land development causes danger to the environment by polluting the air and disrupting geological and animal status.   Air pollution is a big problem with urban life.   Large cities have the characteristic of having polluted skies.   The Environmental Protection Agency passed an act, through legislation, called the Clean Air Act.   The CAA set standards for all cities (Environmental Politics and Policies, 195).   Some of these cities that do not meet such standards include Los Angels, New York, Chicago, Milwaukee, Baltimore, and Houston.   These limits are called National Ambient Air Quality Standards (189).   The NAAQS sets a limit on the amount of Carbon Dioxide, Hydrocarbons, Air born Particulates, nitrogenoxides, lead, and sulfur oxides, and Ozone in the cities air.   Such standards apply for 7 (192).   The definition for Ozone: A strong oxidizing agent with disinfecting properties similar to chlorine; also used in odor control and sludge processing (Environmenta l Engineering, 219).   Ozone is present in the high atmosphere, but at lower levels can be one of the most harmful gases on Earth (Our Poison... ...constantly influenced by their social ruling.   We don’t have except this way of living, there needs to be a change.   We need to prepare for the future, and save what we still have.   We have to, before it’s all gone.            Works Cited 1.) Beyond the numbers; Edited by Laurie Ann Mazur Published by Island Press, Washington DC; 1994 2.) Environmental Politics and Policy; Written by Walter A. Rosenbaum Published by Congressional Quarterly; 1998 3.) Our poisoned Sky; Written by Edward F. Dolan Published by Cobblehill books; 1991 4.) Endangered Environments; Written by James Colgney Published by Apple Tree Inc.; 1994 5.) Dennis Plunkett (American Reality, Phoenix Az) Interviewed: 11-14-98   6.)U.S. Census Bureau (WWW.census.gov/main/www/popclock.html)   7.)Q and A’s About Land Fills (WWW.awma.org/awma/educate/outreach/landfill.html)   

Mexico Essay examples -- essays research papers

Mexico is bordered by the United States on the north, the Pacific Ocean on the west, the Gulf of Mexico and the Caribbean Sea on the east, and Guatemala and Belize on the south. It is characterized by an extraordinary diversity in topography and climate and is crossed by two major mountain chains, the Sierra Madre Occidental and the Sierra Madre Oriental. The high central plateau between these two mountain ranges historically funneled most of the human population toward the center of this region. Mexico features volcanic peaks, snow-capped mountains, tropical rain forests, and internationally famous beaches. Mexico City is an enormous metropolitan area and dominates the rest of the country's culture, economy, and politics. Nearly one-fifth of the nation's population lives in the immediate vicinity of the capital. Mexico City is also a central hub for Mexico's transportation network—including railroads, highways, and airlines. Mexico and the United States share a border that is 3,100 km (1,900 mi) long, much of which is formed by the RÃ ­o Grande, a major river known as the RÃ ­o Bravo in Mexico. This international border is the longest in the world between an economically developing country and one with a highly developed, industrialized economy. This proximity has influenced Mexico's internal and external migration patterns, prompting several million Mexicans to move north to the border region or to the United States itself. It has also affected the culture of both Mexico and the United States, fostering the development of a number of communities along the border that mix the cultures of both nations. Mexico covers an area of 1,964,382 sq km (758,452 sq mi). F. Climate The climate throughout much of Mexico is characterized by high temperatures and moderate to low rainfall. The highland climates vary considerably with elevation, but the central plateau generally has a moderate climate with few extremes of hot or cold. Mexico City, for example, has an average July high temperature of 23Â °C (74Â °F) and an average January high temperature of 21Â °C (70Â °F). Cities at lower elevations on the plateau have somewhat warmer climates. The northern and central areas of the plateau are arid and semiarid, with the drier regions receiving about 300 mm (about 12 in) of rainfall annually. Rainfall increases in the southern regions of the plateau, which receive about 500 to 650 m... ...cy loan to Mexico in January 1995. However, the economic crisis was the worst in Mexico since the global economic depression of the 1930s, and resulted in negative economic growth in the country in 1995 and 1996. The economic crisis led to a serious decline in the standard of living for most Mexicans, as well as an increase in extreme poverty. The nation's gross domestic product (GDP), the value of all goods and services produced domestically by a country, declined 6.2 percent from 1994 to 1995. Since then the economy has been recovering. In 1998 the GDP was $393.5 billion. Mexico City, capital of Mexico and the center of the nation's political, cultural, and economic life. Its population of 16.9 million (1996 estimate) makes Mexico City the second largest metropolitan area in the world, behind only Tokyo, Japan. It is also the seat of Mexico's powerful, centralized federal government. Much of the political decision-making for the nation takes place in Mexico City. Culturally, Mexico City dominates the nation since most of Mexico's leading universities, intellectual magazines, newspapers, museums, theaters, performing arts centers, and publishing firms are located in the capital.

The Effects Of World War One On Canada?s People Essay -- essays resear

When Britain called on Canada to help in World War One, Canadians dutifully volunteered. Many Canadians thought that this would be a glamorous adventure that they could not miss. However, Canadians were in for a rude awakening as this glamorous adventure turned out to be more than they bargained for. This was a new kind of war, one that cost Canadians dearly. Poor organization among troops, appalling war conditions Canadians endured and lack of effective leadership that did not support the best interests of Canadian troops all contributed to the pointless suffering Canadians endured in this supposed glamorous adventure. In the beginning, the poor organization among the troops resulted in some of the mishaps that occurred in battle. In particular, soldiers were all very inexperienced and needed a great deal of training. â€Å"Many recruits had only two hours of target practice a day-not nearly enough to prepare them for battle† (Newman 139). These green soldiers went into battle only knowing the basic necessities of combat. Without these vital techniques and lack of practice, the basic Private stood a slim chance of survival in the front lines. Poor organization was also evident when equipment was being outfitted for the Canadian troops. â€Å"On one occasion a load of boots arrived, all for the right foot† (Newman 139). As well, when Canadian troops were given equipment, it was often found to be inadequate. A Canadian soldier commented, â€Å"We have been given new black boots, magni...

Morgan Components IESE MBA Case Report Essay

  The Director of the European Interior Components Product Line Team of Morgan Components Company, Sean O’Fearna is facing a difficult decision. He needs to respond to the price reduction request on a door panel project, which would take-off in six months. The initial contract was signed at a price of 90 euros between Asiacar and Plasticom. Morgan Components took ownership of the contract, as it acquired the Clondalkin plant of Plasticom. The project was seen infeasible by Morgan Components executives, even before the price reduction. Therefore, first a unit based cost breakdown analysis was applied. It was observed that with the current production processes, the minimum price that Morgan Components could afford was 80 euros. Then the possible process improvements and cost reduction alternatives were analyzed and redesigning the door panel to reduce its features was identified as a must. The other two alternatives of reducing scrap and in-house production of X-27 had their own shortcomings like high initial investments and going against company policies, and therefore should only be applied if the price was restricted to very low levels. (e.g. at 73 euros Alternative of reducing features should be supported by reducing scrap to maintain profitability. For all the price levels below 72 euros, all three measures should be taken) Then, the auto industry was analyzed with regards to the purchasing regimes in the first years of a new launched product. The outcome was that even a failure product driven to market by Asiacar would necessitate Asiacar to buy at least 30,000 units of door panels in total. (A moderate success would result in the purchase of 100,000 to 200,000 units and a real success would take the sales number of Morgan Components up to 300,000 units.) In the light of this analysis a comparison of worst case scenarios were made. The result showed that even in the worst case scenario of going on with the Asiacar contract, Morgan Components would be better off than canceling the contract. Moreover, a series of arguments were prepared for Sean O’Fearna to present his seniors within Morgan Components to convince them on this argument and  get permission to go on with Asiacar contract. Financial situation and the diversification policy of Morgan Components, under capacity production of the Clondalkin Plant and the importance of Asiacar as a client were among these. Then a price range was provided to Sean O’Fearna before his negotiations with Asiacar. He should keep the price at a level between 75 to 81 euros not to forgo the contract, while maintaining profitability. To be able to achieve this, the credibility of the Japanese supplier threat was argued and the risk of changing suppliers for Asiacar was quantified as 5 to 7 euros. Besides, counting on the fact that Clondalkin had the rights to redesign the door panels for Europe up to now, and Asiacar had already invested 2 million to Clondalkin redesigns, the Japanese threat was further diluted. However, these arguments would not mean much without Sean being able to put them clearly on the table during negotiations. Therefore a clear negotiation action plan was outlined in order for Sean to persuade Asiacar to carry on with the contract at a price level of 78, which would reduce the risk on Morgan Components and may even provide a profit of 1.8 million euros in the best case scenario, while, on the other hand, providing Asiacar a savings potential of 3.6 million euros. Problem Statement & Alternatives The main problem Sean O’Fearna is facing in the Morgan Components Case Study is that he needs to give a response to the 25% price reduction request of Asiacar. This reduction is requested on a door panel contract, for which some investments are already made and the process is to be started in six months. Sean is concerned about the potential losses that may arise after this price reduction, and the potential risks of canceling the whole contract. First of all Sean needs to decide on whether to carry on with the contract or cancel it right away, analyzing the cost structure of the door panels. Moreover, he may need to choose a way to modify his production processes to  reduce his costs. Afterwards, if he decides to carry on with the contract, he will need to decide on a minimum price that he may afford and come up with a price range, mutually acceptable for both Asiacar (AC) and Morgan Components (MC). Since Sean himself is not in a position in the organizational structure of MC to decide on such a critical issue all by himself, he will need to discuss the upcomings with his own superiors, before starting a negotiation with AC. In this context, he has to identify the strengths of his arguments that he should draw on during his dialogues with both MC executives and AC representatives. Criteria: All the decisions Sean needs to take are constrained in five main criteria, all of which will be taken into consideration to provide a framework for the analysis. First of all is the risk of canceling the contract right away. Since some investments has already been made and considering the Clondalkin Plant running with 60% capacity currently, quitting the contract will require firing some workers and in total incurring a non-recoverable loss of 3 million euros. Second important aspect is the profitability of the AC contract. Taking into account the potential risks contained within the structure of the contract, the cost structure of the door panel production should be re-analyzed to determine the maximum potential profit and potential losses that may occur at the end of the contract period. Third criterion is the MC organizational structure and corporate strategy. The organizational structure will affect the decisive ability of Sean himself and the possibility of that a certain modification in the cost allocation structure of the contract may be applied. Moreover, alternative cost cutting methods should be analyzed with regards to the strategies of  the company. The fourth key point is AC as a company and its current condition. The relations of MC with AC and the significance of AC to MC as a strategic client have important impact on the decisions of both Sean and the senior management of MC, who are seeking for diversification. Furthermore, the Japanese Supplier threat put forward by AC should be analyzed in the context of AC being in weak financial situation and currently running a revival plan. Finally, Sean and his relationship with the Clondalkin Plant and the Clondalkin town should regularly be considered during analysis, in the sense that he may not yet be able to think unbiased from MC’s side, since he has worked for long years at Clondalkin before MC bought the plant. Analyses of Alternatives in the Framework of Relevant Criteria: 1. To carry on with Asiacar contract or to cancel it right away The first issue to observe before making this decision for Sean is to figure out the losses the company is going to face. It is clearly stated in the case that the company is going to lose 3 million euros if the contract is cancelled now. So, Sean needs to check the alternative of going on with the contract and analyze the profitability of it, in order to make a net comparison. To have a better judgment of the profitability of the door panel contract, Sean first needs to analyze the costing methods of Plasticom and MC. He needs to spot out the Two main differences are in the labor costs and the corporate overheads. Assuming that wages might have been increased after the factory was bought by MC in order to increase motivation and gain worker loyalty. Moreover, since the wages might as well rise in the following five year contract period, the increased labor cost approach seems conservative, but logical. On the other hand, the corporate overheads are only an allocated portion of MC headquarters’ costs; they have no direct relation with this contract alone and do not affect the potential positive cash  flows. As Sean convinced MC executives not to consider the corporate overheads to carry on with the project before, they definitely will not be included in the analyses for such a critical decision of canceling the contract. The next step in the analysis of costs should be to decide whether AC is going to buy 300,000 units in the following five years and how the purchases will be distributed over years. It can be certainly understood from Sean’s doubts, that in the AC contract there’s no restriction for AC to buy 300,000 door panels. Also, big manufacturing companies tend to transfer market risks on to the supplier as a procurement strategy. It is often the case that if the product of a main company does not sell in the market, it is the supplier who suffers because of not being able to compensate initial investments. Therefore, it is crucial to analyze costs on per-unit base and to carefully differentiate variable costs and fixed costs. Exhibit-1 shows the recommended cost structure per unit door panel. The reason that indirect labor, maintenance and factory overheads were incurred as variable is that these costs tend to change with the volume of production and would disappear if there were not door panel production. Even factory overheads are allocated on to projects according to production volumes. So, it is obvious from Exhibit-1 that Sean cannot afford to carry on with the contract at a price of 68 euros per panel unless a cost reduction in the production process is made. Then, the decision of going on with the contract depends on the next decision step, which is; 2. To choose which alternative cost reduction methods to implement Sean has three alternative ways to reduce production costs of door panels. First of which, – now on to be called Alternative-1 – is to reduce the features of the panel design. Alternative-2 is to reduce scrap and Alternative-2 is to produce X-27 in-house. All possible combinations and outcomes of these process improvements are given in Exhibit-2. As it is seen, the Alternatives 2 and 3 are inefficient to reduce the cost below the 68-euro level. Their effect is more adequate when combined with  Alternative-1. On the other hand, the Alternatives 2 and 3 bring some shortcomings with them. First of all, Alternative-3 requires a non-strategic component to be manufactured in-house and may cause a supplier to go out of business. This is both against two critical criteria; MC corporate policies and Sean’s relations with Clondalkin. Moreover, both Alternative 2 and 3 require an increase of initial investments. This increases the risk undertaken by MC with regards to the fact that the amount of purchase and its distribution over the years is ambiguous. Exhibit-3 presents possible procurement regimes that may be followed by AC according to the success level of their new car model. A summary of Exhibit-3 may be that while a successful or moderately successful model would create a purchase of over 100,000 units of panels, the failure of AC would mean sales of below 100,000 units for MC, but particularly not below 30,000. This analysis enables us to compare worst-case scenarios and make a distinct comparison between canceling the contract and going on with it. Exhibit-4 demonstrates this comparison. According to this, it is clear that even if AC’s new model is a failure, MC would be better off by continuing with the contract with minimum condition of implementing cost reduction Alternative-1 is met. Sean should do everything he can to keep this contract, in order to minimize Clondalkin’s losses. 3. Affordable Price Range and the Effect of Price on Cost Reduction Alternatives Graph at Exhibit-5 illustrates the variation in breakeven points of the AC contract with different cost reduction alternatives at different price levels. This graph is essential in several ways: First, the minimum affordable price for MC is 72 euros, assuming that it is the probability to sell more than 300,000 units with this contract is very low. It also reveals the cons and pros of the alternative cost reduction methods. For example, if the price level is restricted to a level of 72 euros or below by AC, then the trade-offs of Alternatives 2 & 3 are less important compared to the  profitability increase they bring and both should be implemented immediately. If a price of 73 euros may be negotiated with AC, then the implementation Alternative-3 may be postponed or completely dropped due to its shortcomings and only Alternative 1 and 2 would be enough together to bring MC to a breakeven at 300,000 units. At even higher price levels, alternatives 2 and 3 lose their significance and MC may carry on the contract only with Alternative-1. However, can the price reduction request of 25% be negotiated with Asiacar? Is the Japanese threat credible? What are the arguments and strengths that Morgan Components has in hand to increase the requested price to a higher level? How important is this contract and the relationships with Asiacar for both Morgan Components and Sean himself? All these questions and more need to be answered in order to come up with a down to earth action plan that can be applied immediately to get Sean and Morgan Components out of this situation without any significant losses. Synthesis: In the light of the analysis made, my recommendation for Sean O’Fearna is to go on with the Asiacar contract with whatever means possible. This outcome is also supported by the criterion of Sean’s relationship with Clondalkin plant. He, having a strong reputation within Clondalkin, would not want to put the plant at risk by continuing at a capacity of 60% and not making decent profits. On the other hand, considering the organizational structure of Morgan Components, Sean is not at a position to take such a critical decision on his own. He needs to convince the senior executives of Morgan Components about carrying on with the contract. However, at this point, his strong relations with Clondalkin my turn out to be a disadvantage for him. Morgan Components executives, knowing Sean’s strong tie to Clondalkin may respond to this proposal biased. Therefore, Sean needs to support his arguments with fact, especially the data presented in the exhibits of this report, which clearly show that canceling the contract brings the worst possible outcome. Moreover, Sean must emphasize on the corporate vision of Morgan Components. Being 80% dependent on only one firm and being very eager about their diversification policy, creating new businesses with Asiacar has high importance of Morgan Components. Asiacar is not a completely new client for Morgan Components and the three plants of Plasticom were acquired by Morgan Components mainly to increase businesses with Asiacar. When compared to the 1.2 billion euro sales size of Morgan, the 27 million euro potential of this contract may seem small at first sight. However, at this crucial period where Morgan is trying to minimize its losses by all means, letting Asiacar down with this contract would put both current and future businesses of Morgan with Asiacar at stake. In addition to that the Asiacar contract will increase the capacity usage of the Clondalkin plant significantly from 60% to 90%. Clarifying all these critical aspects should get Sean the necessary permissions to start negotiations with Asiacar to continue business with them. The next step for Sean should be to analyze the possibility of negotiating the requested price of 68 euros with Asiacar. Greatest threat for Morgan Components is the possibility that Asiacar may transfer its supply to a Japanese supplier, which is currently supplying door panels for the Japanese version of the same Asiacar model. Nevertheless, if the nature of automotive industry is analyzed, it will be seen that most of the main manufacturers apply Just-In-Time production procedures, or even if not, they try to minimize their inventory by pressurizing suppliers with tight deadlines and minimum delivery lots. Supplying from Japan to a manufacturer in UK, other than bringing an additional logistics cost of 4 euros, is extremely risky for the manufacturer in the sense that it may increase lead-times and cause inventory pile-ups. Although it is difficult to quantify such a risk, Sean’s target price during his negotiations with Asiacar should definitely be higher than 72 euros. In that case, what should be the target price for Sean during his negotiations with the Asiacar representatives? Looking at Exhibit-3 again, aiming a price that would breakeven at 300,000 units is far too risky for  Morgan Components. On the contrary, trying to achieve a profit even if Asiacar’s new product fails would be too opportunistic and may cause an unpleasant response of direct change of supplier on the Asiacar side. Therefore, targeting a price range that would arrive at a breakeven at moderate success would be my suggestion. This price range may be deducted from Exhibit-5, and falls between 75 euros and 81 euros. Furthermore, the Clondalkin plant contains a key advantage regarding the Asiacar contract. Clondalkin is not a just a plant that is to produce a given design; Asiacar has provided Clondalkin the initial design and the redesign of the door panel and the necessary adaptations of the design for the European market is carried by the Clondalkin plant. Why is this issue so important? Because of the two vital criteria for Asiacar: Time restrictions and the necessary initial investments. First of all, there are only eight months left for the product launch of Asiacar, which is on May 2005. This means that the first samples of the door panels for the try-outs should be delivered to Asiacar at the latest by January 2005. Thus, the new supplier needs to redesign the product for European Markets, produce the mold, and start the production within 6 months. Would Asiacar take such big risk? Besides, Asiacar has provided 2 million euros of a total of 5 million euro investment on the redesign of the door panels. Now Asiacar has two possible option, which I recommend Sean to emphasize clearly during the negotiations: Asiacar is either going to provide the remaining 3 million euros and wait until Clondalkin completes the molds and then transfer them to Japan, or come down to accept a mutual agreement for with Morgan Components In order to be able to build on this argument without being offensive, my recommendation is that Sean should follow such an action plan: First he should mention that Morgan Components wants to support the revival plan of Asiacar and ready for sacrificing to an extent to maintain a sustainable relationship. However he should stress on the fact that pressurizing Morgan Components for a price reduction to 68 euros would result in the shut down of the whole company. He should support this by the data provided in Exhibit-6, which is the re-structured version of the cost breakdown in  Exhibit-1. Exhibit-6 will show Asiacar that below 81 euros, Morgan Components will theoretically not make profits for this contract. Moreover, reducing the price down to 81 euros would mean a potential saving of 2.7 million euros for Asiacar. He should also underline the risks and additional costs of working with a Japanese supplier and mention that a 68 euro price from a Japanese supplier would mean the ex act same cost to Asiacar to buy the panels at a 73 euro price from Morgan. Setting his minimum and maximum clearly to 73 and 81 euros, then Sean may start releasing the handles again. Depending on the reactions of the Asiacar representative, he may restate the importance of being an Asiacar supplier for Morgan Components and approach with the favor of going below 81 euros with the following conditions being guaranteed: More future contracts starting form 2005 and the renegotiation of the door panel prices at the end of 2005. Even after that, if Asiacar keeps insisting on very low price levels, the issue of having the current design in hand and having already expended the 2 million design fund should be raised, but without being offensive or destructive. The objective must be keeping the price in range of 75 to 81 euros. If Sean may apply my recommendation completely, he should come out of the Asiacar negotiations, with a price of around 78 euros. Having this price settled and implementing a redesign on the panel to reduce features (Cost Reduction Alternative-1), Morgan Components may expect a profit of nearly 1.8 million euros within the next five years, if the project is a complete success. Moreover, since the initial investments will be recovered after 170,000 units, the risk will be also minimized. Within very tight deadlines and such stressful conditions, following such a structured action plan may not be very easy for Sean O’Fearna to apply, however, with the above given key points in mind he should be able to achieve the outcome to save his professional reputation, Clondalkin Plant’s future and moreover, to provide a decent profit for his new company, Morgan  Components.

Literature Review How to write

publications check into How to write BY Ravit*G1 name 1 Writing a publications Review What is a lit Review? A books look back is a survey and demonstrateion of the literary works in a given argona of believe. It is a concise overview of what has been studied, argued, and established closely a contain, and it is unremarkably liftd chronologically or thematically. A literature examine is write in essay format. It is not an annotated bibliography, beca use it groups cerebrate change by reversals together and discusses trends and disciplines rather than centering on one item at a m.It is not a compendium rather, it evaluates former and urrent look in demand to how relevant and/or useful it is and how it relates to your cause indecision. A Literature Review is to a greater extent than an Annotated Bibliography or a summary, because you atomic number 18 organizing and presenting your sources in wrong of their overall relationship to your induce project. Pu rpose A literature examine is written to high exercise set out specific arguments and ideas in a range of study. By play up these arguments, the writer attempts to show what has been studied in the matter, and also where the weaknesses, gaps, or adjourns aiming further study are.The analyse should in that respectfore also tell to the endorser why the riters look for is useful, necessary, consequential, and valid. Questions a Literature Review Should Answer request questions such as the following allow for help you sift done your sources and organize your literature check. Remember, the literature reassessment organizes the introductory question in the light of what you are planning to do in your give birth project. Whats been done in this emergence land to date? What are the significant discoveries, signalize concepts, arguments, and/or theories that scholars have put onward? Which are the important works?On which cross areas of the subject has previous research oncentrated? Have there been developments over term? What ruleologies have been used? be there any gaps in the research? Are there areas that havent been looked at closely yet, just which should be? Are there unsanded ship canal of looking at the topic? Are there improved methodologies for researching this take? What future directions should research in this thing take? How provide your research get on on or depart from afoot(predicate) and previous research on the topic? What part will your research go for to the field?Length The length ofa literature follow varies depending on its purpose and audience. In a hesis or dissertation, the round is usually a full chapter (at to the lowest degree 20 pages), but for an assignment it may single be a few pages. mental synthesis There are several bureaus to organize and structure a literature review. Two common ways are chronologically and thematically. Chronological In a chronological review, you will group and di scuss your sources in order of their appearance (usually publication), highlight the changes in research in the field and your specific topic over time.This method is useful for papers focusing on research methodology, historiographical papers, and other(a) composing where time becomes an important lement. For example, a literature review on theories of mental disorder talent present how the intellectual of mental illness has changed through the centuries, by giving a series of examples of key developments and ending with original theories and the direction your research will take. thematic In a thematic review, you will group and discuss your sources in terms of the themes or topics they cover.This method is often a stronger one organizationally, and it can help you protest the urge to summarize your sources. By classify themes or topics of research together, you will e able to demonstrate the roles of topics that are important to your research. For example, if the topic of the literature review is changes in popular music, then there qualification be separate sections on research involving the production of music, research on the dispersal of music, research on the commentary of music, and diachronic studies of popular music.No matter which method you choose, recollect Within separately(prenominal) section of a literature review, it is important to discuss how the research relates to other studies (how is it similar or different, what other studies have been done, etc. as rise up as to demonstrate how it relates to your own work. This is what the review is for dont leave this connection out line http//www. smu. ca/ administration/library/litrev. hypertext markup language Article 2 Write a Literature Review 1.Introduction Not to be confused with a book review, a literature review surveys scholarly articles, books and other sources (e. g. dissertations, conference proceedings) relevant to a particular issue, area of research, or possibilit y, providing a description, summary, and small evaluation of each work. The purpose is to purpose an overview of significant literature published on a topic. 2. Components Similar to original research, development of the literature review requires four stages chore formulationwhich topic or field is being examined and what are its component issues?Literature searchfinding existents relevant to the offspring being explored Data evaluation ascertain which literature makes a significant contribution to the belowstanding of the topic Analysis and interpretation discussing the findings and conclusions of liable(p) literature Literature reviews should stop the following elements An overview of the subject, issue or theory under circumstance, along with the bjectives of the literature review Division of works under review into categories (e. g. hose in support of a particular position, those against, and those offering alternative theses entirely) chronicle of how each work is si milar to and how it varies from the others Conclusions as to which papers are best considered in their argument, are most persuade of their opinions, and make the superlative contribution to the understanding and development of their area of research In assessing each piece, consideration should be given to ProvenanceWhat are the authors credentials? Are the authors arguments supported by evidence (e. . primary historical material, face studies, narratives, statistics, recent scientific findings)? Objectivityls the authors status even- handed or prejudicial? Is un manage data considered or is certain pertinent information ignored to prove the authors principal? PersuasivenessWhich of the authors theses are most/least convincing? ValueAre the authors arguments and conclusions convincing? Does the work ultimately contribute in any significant way to an understanding of the subject? 3. Definition and Use/PurposeA literature review may constitute an necessary chapter of a thesis or dissertation, or may be a self-contained review of writings on a subject. In either case, its purpose is to amaze each work in the place setting of its contribution to the understanding of the subject under review Describe the relationship of each work to the others under consideration detect new ways to interpret, and shed light on any gaps in, previous research Resolve conflicts amongst seemingly contradictory previous studies Identify areas of prior scholarship to disallow duplication of effort Point the way forward for further researchPlace ones original work (in the case ot theses or dissertations) in the context ot existing literature The literature review itself, however, does not present new primary scholarship. http//library. ucsc. edu/help/howto/write-a-literature-review What is a review of the literature? A literature review is an government note of what has been published on a topic by accredited scholars and researchers. Occasionally you will be asked to writ e one as a separate assignment (sometimes in the form of an annotated bibliographysee the bottom of the neighboring page), but more often it is part of the introduction to an essay, research eport, or thesis.In writing the literature review, your purpose is to convey to your reader what knowledge and ideas have been established on a topic, and what their strengths and weaknesses are. As a piece of writing, the literature review must be defined by a guide concept (e. g. , your research objective, the problem or issue you are discussing, or your quarrelsome thesis). It is not Just a descriptive list of the material available, or a set of summaries Besides enlarging your knowledge about the topic, writing a literature review lets you gain and demonstrate skills in deuce areas 1 . formation want the big businessman to scan the literature efficiently, using manual or computerized methods, to pick up a set of useful articles and books 2. critical appraisal the top executive to app ly principles of analysis to identify naive and valid studies. A literature review must do these things 1 . be organized around and related straight to the thesis or research question you are developing 2. synthesize results into a summary of what is and is not known 3. identify areas of controversy in the literature 4. ormulate questions that need further research Ask yourself questions like these . What is the specific thesis, problem, or research question that my literature review helps to define? 2. What type of literature review am I conducting? Am I looking at issues of theory? methodology? policy? numerical research (e. g. on the effectiveness of a new procedure)? qualitative research (e. g. , studies )? 3. What is the screen background of my literature revie w? What types ot publications am I using (e. g. , Journals, books government documents, popular media)?What discipline am I working in (e. g. , nursing psychology, sociology, medicine)? 4. How good was my information seeking? Has my search been wide enough to chequer Ive found all the relevant material? Has it been narrow enough to exclude immaterial material? Is the number of sources Ive used beguile for the length of my paper? 5. Have I critically analysed the literature I use? Do I follow through a set of concepts and questions, comparing items to each other in the ways they get away with them?

Hayleys Consumer HR policy

You dont need to get a team policy on every aspect of your organization.Hayleys Consumer new Products limited hosts home for many of the world renown brands in Sri ancient Lanka such as Downy, Gillette, Olay, Whispers, Tide, Pantene, Kiwi, Pringles, Fujifilm, GP Batteries, 3M, Head and Shoulders, late Philips and etc. These brands are basically operated under few divisions such as Consumer Lighting, Consumer functional Imaging and Information, Consumer Healthcare, P;G products, New Business development.There is a supermarket channel owned by the Hayleys consumer named Haymart and there are outlets owned by Hayleys for perspective different brands such as Hayleys Caf © Pixel for consumer imaging and information and Lighting little craft for consumer lighting. Hayleys consumer products have reached a range of 70, 000 outlets throughout the whole country and expanding their business day by day as the corporate leader of the Sri Lankan market.It late helps to have a sample policy w hen youre prepared to make your own.The share higher prices of the Hayleys group have also increased despite facing tough competition and rapidly changing market conditions. Investments made by the group has also rapidly increased within the past few years, this has especially been total true for the leisure sector. 2.Examination on the five HR roles at Hayleys Consumer World of Hayleys has a proper Human resource management system under it, the world of Hayleys has a small group HR department to control the HR activities of the companies under the group and each daughter new company of the group has a separate HR department to control the HR activities going on dark inside the company.

Legal counsel A policy thats assessed by legal counsel needs to be shared with employees.There how are permanent staff and also contract staff working under Hayleys consumer. Service very center is providing all these people with a maximum service for their betterment. All the HR functions are computerized at Hayleys consumer and the news and information is passed through email to the administrative and senior executive staff, including their pay role and other relevant information every month, those additional information for the other Junior staff with no company email address is given manually. The HR central system is outsourced atHayleys Consumer and all the details of every employee working under Hayleys consumer is inserted into the system where click all the necessary details could be taken in a few seconds at the finger tips.Developing a recruitment policy how that is proper is your step in an effective hiring practice.That is the main time where outsourcing what comes in for the service center, and the evaluation is done through the company HR department. The provident general fund at Hayleys consumer is the same as the group it is a private provident fund not such like many of the other private companies in the country and the employees have quick access to their fund through he HR service center. . 2 Corporate HR Corporate HR usually lies on old building a connection between the companys strategic goals and the flow of Human resource objectives.

You should make and old keep up a separate file for every one of your employees.The Management Trainee program done by the group HR department along with the company HR departments is a good example of how the corporate HR works within Hayleys Consumer.Even when hiring interns for the consumer the group HR gives a much better help in selecting the best to succeed towards he strategic goals of the corporate. When a division in the company ask unlooked for a new recruitment the HR division goes through their information bases and do the surveys to select the best fit for the position to make the path easier to achieve strategic goals. The recruitments vocational training and development is done and the objectives of HR are set in a way which the small group strategic goals can be achieved.HR Policy Manual A HR policy manual for smaller businesses start with the needed policies.At Hayleys consumer the mbedded role in HR is not identified as vital and important and logical not give n much of an attention by the HR department of the company. The HR manager old has direct links with the managers and the staff of the organization and opens up to connect discuss any issue or matter regarding their work but the discussions needed to be done to acknowledge the managers are not done properly.Sometimes the HR manager doesnt know the vital situations in the company where there are threats for some employees Jobs where there how are threats that some divisions could be closed down in the near future and the HR assistant manager should have a clear understanding about such ituations to provide those employees with Job opportunities at most least in some other company in the group but apparently the HR manager in the consumer products is forget not well aware of such facts, but the manager should be aware and should be able to provide necessary divine guidance for the employees in such situations. .

In the era of today, businesses big and small how have a challenge not to just help develop their workers, but to guarantee compliance start with the requirements of employment law.2. 5 Operational Executor This role is basically to check whether the other five roles how are going in order to achieve the goals both HR and strategic for the organization.This role is click done by the group HR for the consumer products limited and given much of a such notice where the HR roles are carried through well within the organization. Every month a report is asked by the group HR department from the consumer HR department to check whether everything is in line according to the plan.Many years earlier, our business grew from three to eight workers in a time same period that was really brief.Employees need to be favorable and collaborative.

Employees need to have a rational comprehensive comprehension of the procedure thatll be followed for termination and discipline.Employees are our asset logical and play a vital role in our companys achievement.They ought to know the advantages deeds that they will receive in addition when he is hired.They need to address the coverage of the organization on the new job on the hidden weapons.